Resine Mixed Bed manufacturer supplier distributor in Mumbai, Kandla, Kolkata, Vizag, Chennai, India, Fujairah, Dubai, Sharjah, UAE, Gulf, Middle East, Muscat Oman, Kenya Africa. Get the best quality of Resine Mixed Bed at a competitive price from us. We have ready stock of Resine Mixed Bed in India, UAE Gulf, Oman, Kenya Africa. Contact us for bulk as well as small orders.
SURAT CHEMICAL TAG:
Mixed Bed resins, a mixture of cation and anions are used as polishers to obtain low conductivity water. Typically, low conductivity water is required for bolier feed for high pressure boilers, electronics, electrical discharge cutting machines and pharmaceutical applications.
Mixed Bed can also be used as a primary deionisation unit when the inlet salt is low. Mixed Beds also find applications in process industry where demineralization of pH sensitive products is to be carried out.
Mixed Bed Resins can be supplied in highly regenerated, premixed conditions for use in dye applications or they are also available as highly regenerated cations and anions for use in regeneratable mixed bed units. Premixed Resin is available in different proportions and combinations of cations and anions to suit the end of users needs.
NOTE: Mixed Beds are generally used in applications where water of very low conductivity is desired.
|
Form |
: Solid |
|
Color |
: Blue |
|
Odor |
: Odorless |
|
Odour threshold |
: Not determined. |
|
pH-value |
: Not applicable. |
|
Melting point/Melting range |
: undetermined |
|
Boiling point/Boiling range |
: undetermined |
|
Flash point |
: Not applicable |
|
Flammability (solid, gaseous) |
: Not determined. |
|
Decomposition temperature |
: Not determined |
|
Auto igniting |
: Product is not selfigniting. |
|
Danger of explosion |
: Product does not present an explosion hazard |
|
Explosion limits Lower |
: Not determined |
|
Explosion limits Upper |
: Not determined. |
|
Vapor pressure |
: Not applicable. |
|
Form |
: Solid |
|
Color |
: Blue |
|
Odor |
: Odorless |
|
Odour threshold |
: Not determined. |
|
pH-value |
: Not applicable. |
|
Melting point/Melting range |
: undetermined |
|
Boiling point/Boiling range |
: undetermined |
|
Flash point |
: Not applicable |
|
Flammability (solid, gaseous) |
: Not determined. |
|
Decomposition temperature |
: Not determined |
|
Auto igniting |
: Product is not selfigniting. |
|
Danger of explosion |
: Product does not present an explosion hazard |
|
Explosion limits Lower |
: Not determined |
|
Explosion limits Upper |
: Not determined. |
|
Vapor pressure |
: Not applicable. |
The Poular application is as below -
- Ultra pure water production
- Demineralisation
- Deionisation
- Condensate polishing (boiler feed water)
- Micro-electronics cleaning
- Pharmaceuticals
- Metal Removal
Rinse Cycle:
The rinse cycle removes remaining brine from the tank. Normally 10 minutes of Rinse flow equivalent to service flow is sufficient to rinse out excess brine.
Though synthetic softening resins normally last 5 years or so, but certain conditions can cause resin to breakdown earlier. Oxidation by chlorine is probably the most common cause of resin breakdown. When chlorine is used to oxidize iron in the water, the chlorine should be removed before ion exchange.
Secondly Iron will significantly affect the ability of resins to remove hardness ions. Ferrous iron can be oxidized during softening and precipitate out as iron oxide on the resin, and no amount of brine will remove the iron fouling. If iron oxide is formed before ion exchange unit, it can be filtered out by the resin and removed during the backwashing of the unit. Normally if the iron concentration in the source water is high, iron removal is provided ahead of the exchange unit to prevent fouling of the unit.
Turbidity, organic chemicals, and bacterial slimes resins resulting in the loss of some of the resin exchange capacity. The best solution is to remove of the suspended matter with filtration before the softening process.
ADVANTAGES OF ION-EXCHANGE SOFTENING:
Compared with lime-soda ash softening, ion-exchange has certain advantages. It is compact and has a low capital cost. The chemicals used are safer for the operator to handle and operation is much easier. It can be totally automated. Softeners also can be Automatic duplex type to ensure continuous supply of soft water in case of critical application like Boiler Feed etc. Many systems have found ion-exchange to be the most cost effective way to produce quality water for their customers.
Each application requires a different water quality. In general cation resin for water softening and demineralization may last 5 to 10 years. Anion resins used in demineralization last anywhere from 3 to 5 years and are dependent on operational conditions. Like every other resin, the life of mixed bed resin is dependent on the application in which it is being used. Resin life is difficult to predict; in critical applications it's best to start analyzing and benchmarking the resin at least once per year.
